The PC Auto pump controller with built-in pressure transducer is used to automatically control the functioning of electric water pumps. It has two modes – Automatic and Manual. In Automatic mode the control unit calculates the start pressure to be 55% of the pumps turn off pressure. In manual mode you can manually select the start pressure between .5 bar and 3.5 bar.
Features Automatic control of pump operation and shutdown
Stop pumping automatically in case of water shortage
Will start automatically after power failure.
Manual mandatory start-up
Over-pressure protection, if the system pressure is more than 10 bar, the pump automatically stops the pump from working.
Water shortage self-start, the time interval of self-start is 1 minute, 30 minutes, 1 hour, and then 1 hour cycle.
Anti-seize function causes the pump to turn on at least once every 48 hours.
LED Display.
Technical Features
Start-up pressure range: 0.5-6.0 bar (0.5-3.5 bar in normal mode, 0.5-6 bar in automatic mode)
Maximum rated current: 16A
Maximum power: 2.2kW
Permissible maximum pressure: 10 bar
Rated voltage: 220V
Frequency: 50Hz
Maximum ambient temperature: 40°C
Maximum Medium Temperature: 60°C
Protection Level: IP65
Model
Start Pressure
Inlet/Outlet
Phase
Voltage
PC-AUTO
0.5-6.0 Bar
25mm
1
220-240
