The HP202-HGX pump is a light weight, self-priming, engine driven pump supplied ready to operate complete with hose fittings and suction strainer.
Specifications:
5.5HP (4.1kW)
Max Flow rate: 300 LPM
Max Pressure: 113 psi Self Priming: 6m Suction
Max discharge head: 80 meters Inlet 2 inch (50mm) Outlet sizes 1.5 inch (40mm) Liquid temperature range: 2 – 35 deg C Maximum ambient temperature: 40 deg C
Max operating pressure: 6 bar Package dimensions: 420 x 420 x 410
Common Applications:
General water transfer
Equipment washdown
Firefighting
De-watering flooded areas
Filling water trucks
Features:
Honda GX200 4.1 kW (5.5HP) single cylinder, four stroke air cooled
Comes with 600ml of 15W/40
Easy to start and simple to operate
Starting system: Recoil
Maximum Engine Revs: 3600rpm
Self priming for ease of use
Cast iron head with cast iron impeller and volute
Mechanical Seal: Carbon/Ceramic/Nitrile
O rings and gaskets: Nitrile
3.1L fuel tank
Run time per tank: 2-3 hours
Engine oil capacity 600ml
Heavy duty roll frame with rubber feet
Low oil cut out system will prevent the engine from seizing should the pump tip over while running or run low on engine oil
Weight 28Kg
**We recommend a Hansen foot valve with a hose tail to be connected to the suction pipe. 12 Months Warranty
